ポンプから医療機器まで幅広い商材を取り扱う機械専門商社 ジャパンマシナリー株式会社

LANGUAGE:
日本語
English
お問い合わせ・資料請求
ホーム > 製品情報 > Studs And Pins For Sheetmetal High Tensile Strength, Non Flush – Types HF109, HFG8

Studs And Pins For Sheetmetal High Tensile Strength, Non Flush – Types HF109, HFG8 PennEngineering

特徴

Heavy duty high tensile strength studs are manufactured for the most demanding applications from medium carbon alloy steel, then heat-treated to high strength and hardness qualities.

説明書 : マニュアル

お問合せ

仕様

High-Tensile Strength Studs - Types HFG8™, HF109™ - Metric


PEM® self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly and evenly around the ribs and into the annular groove - creating a flushhead assembly and securely locking the stud into the sheet with high torque-out and pushout resistances.

HFH (heavy-duty) Studs replace weld studs with easier installation at lower costs. The large stud head which projects above the sheet material distributes the axial tightening force over a large area thereby improving pull through resistance.

HFG8 and HF109 (heavy-duty high tensile strength) Studs are manufactured for the most demanding applications from medium carbon alloy steel, then heat-treated to high strength and hardness qualities

  • Types HFG8 and HF109 are for heavy-duty applications in sheets as thin as 1.000 mm.
  • Grade 8 and property class 10.9 studs meeting 150 ksi/1040 MPa minimum.
  • Recommended for use in steel or HSLA steel sheets HRB (Rockwell “B” Scale) 89 or less and HB (Hardness Brinell) 180 or less.
  • Large head diameter spreads compressive stress on panel.
  • To be sure that you are getting genuine PEM products, look for the PEM stamp. Studs within the size range of the SAE and ISO specs are also identified with the Grade 8 and 10.9 head markings respectively.

概略仕様

HF G8 - 032 - 8 ZI
| | | | |
Type Strength Grade Thread Size Length Code Plating Designation

HFG8 – Heat-Treated Medium Carbon Alloy Steel

HF109 –Heat-Treated Medium Carbon Alloy Steel


Part # Thread Size x Pitch L - Length ± 0.4 H ± 0.25 S Max. Fastener Material Standard Finish
HF109-M5-15ZI M5 x 0.8 15.00 mm 10.30 mm 2.60 mm Heat-Treated Medium Carbon Alloy Steel Zinc Plated, 5µm, Colorless
HF109-M6-15ZI M6 x 1 15.00 mm 12.10 mm 2.7 mm Heat-Treated Medium Carbon Alloy Steel Zinc Plated, 5µm, Colorless
HF109-M5-20ZI M5 x 0.8 20.00 mm 10.30 mm 2.60 mm Heat-Treated Medium Carbon Alloy Steel Zinc Plated, 5µm, Colorless
HF109-M6-20ZI M6 x 1 20.00 mm 12.10 mm 2.7 mm Heat-Treated Medium Carbon Alloy Steel Zinc Plated, 5µm, Colorless
HF109-M8-20ZI M8 x 1.25 20.00 mm 16.60 mm 3.40 mm Heat-Treated Medium Carbon Alloy Steel Zinc Plated, 5µm, Colorless
HF109-M5-25ZI M5 x 0.8 25.00 mm 10.30 mm 2.60 mm Heat-Treated Medium Carbon Alloy Steel Zinc Plated, 5µm, Colorless
HF109-M6-25ZI M6 x 1 25.00 mm 12.10 mm 2.7 mm Heat-Treated Medium Carbon Alloy Steel Zinc Plated, 5µm, Colorless
HF109-M8-25ZI M8 x 1.25 25.00 mm 16.60 mm 3.40 mm Heat-Treated Medium Carbon Alloy Steel Zinc Plated, 5µm, Colorless

03-3730-5991 お問合せ

 カタログのダウンロードを希望される方はこちらをご入力ください。
 [必須]  (例)日本
 [必須]  (例)太郎
 メールアドレス[必須]   (例)[email protected]
 会社名[必須]
 郵便番号[必須]  (例)123-0001
 都道府県[必須]
 住所[必須]
 電話番号[必須]  (例)03-123-0000
 コメント

購入ご検討段階から納入後のトラブル対応まで、経験豊富なスタッフが確かな技術力でお客様のご要望にお答え致します。まずは是非一度お気軽にご相談ください。

サポート

製品ピックアップ

すべて

prev next

展示会・イベント

詳細へ

国内で開催される様々な展示会・イベントで製品をご覧頂けます。


JFES

  • 製品カタログ ダウンロード
  • 製品カタログ ダウンロード
  • 製品カタログ ダウンロード
お問い合わせ・資料請求

Copyright© JAPAN MACHINERY Co., Ltd. All rights reserved.