ポンプから医療機器まで幅広い商材を取り扱う機械専門商社 ジャパンマシナリー株式会社

LANGUAGE:
日本語
English
お問い合わせ・資料請求
ホーム > 製品情報 > Rope Layer 200/4

Rope Layer 200/4 SIMA

特徴

This new machine developed by SIMA Group represents an important novelty in the field of rope layers, because 200/4 is suitable to produce small diameters, from 2 to 6mm, without investing high capitals, therefore with the max economical conveniennce.

The 200/4 is made of a feeding section, running with 3 or 4 strands, and of a take-up section, which is the GS2000, a more than tested machine. The system conceived in this way leaves complete freedom to the customer concerning its use, because it is evident it can be used as a rope layer or, using the only take-up section, as a twister.

The 200/4 runs on the principle of the 2 twists in the feeding section and 2 twists in the take-up section; mechanically speaking, cynematism where introduced, which have been considerably simplified, with benefits to the noise level, which is within what foreseen by the international regulations, thanks also to the insulation.

お問合せ

仕様

ADVANTAGES:
  • Set-up of 200/4 through the control panel of GS2000
  • Electronic change of the pre-twist ratio
  • Device to detect the strand breakage
  • Immediate change of the rotation direction S or Z
  • New cynematism with consequent noise reduction
  • Feeding up to 4 bobbins of 12" x 12", for a total of 160000 den

We wish here by to point out that in its range of rope layers SIMA Group has another machine, with the same diameter, the 300/3 and 300/4, which is not replaced, but comes alongside. In fact, the 200/4 for ropes of Ø= 3mm produces 16 Kg/h while the 300 produces 29 Kg/h, t is therefore clear that the 300 is extremely valid and unreplaceable for the large productions.

概略仕様

DESCRIPTION UNIT DATA
Rope diameter (in outlet) mm 2 ÷ 6
Max rotation r.p.m. 4000
Twists Twists/minute 8000
Twist Range Twists/meter 20 ÷ 125
Twist direction - S or Z
N° of spools in feeding - 4
Spool in feeding section inches 12" x 12"
Weight of the PP full spool kg 10,6
Installed power kW 7,5+11
Machine dimension: feed + take-up mm 5103x1600x1930
Machine weight kg 1200+1350
Take-up in bobbins inches 6"-8"-10"-12"

03-3730-5991 お問合せ

 カタログのダウンロードを希望される方はこちらをご入力ください。
 [必須]  (例)日本
 [必須]  (例)太郎
 メールアドレス[必須]   (例)[email protected]
 会社名[必須]
 郵便番号[必須]  (例)123-0001
 都道府県[必須]
 住所[必須]
 電話番号[必須]  (例)03-123-0000
 コメント

購入ご検討段階から納入後のトラブル対応まで、経験豊富なスタッフが確かな技術力でお客様のご要望にお答え致します。まずは是非一度お気軽にご相談ください。

サポート

製品ピックアップ

すべて

prev next

展示会・イベント

詳細へ

国内で開催される様々な展示会・イベントで製品をご覧頂けます。


JFES

  • 製品カタログ ダウンロード
  • 製品カタログ ダウンロード
  • 製品カタログ ダウンロード
お問い合わせ・資料請求

Copyright© JAPAN MACHINERY Co., Ltd. All rights reserved.