ポンプから医療機器まで幅広い商材を取り扱う機械専門商社 ジャパンマシナリー株式会社

LANGUAGE:
日本語
English
お問い合わせ・資料請求
ホーム > 製品情報 > HART® Communicators

HART® Communicators Meriam

特徴

Meriam’s flagship products, the MFC5150 HART® Communicator which enables direct communication from any HART® transmitter wirelessly and the MFT 4010 Modular Calibrator, which delivers the versatility of a calibrator and the convenience of HART® Communications afford Meriam the advantage of providing products with the highest level of innovation for commissioning, configuring and maintaining devices to allow for efficient process operations. These smart devices were designed to optimize process automation via HART® Communication by offering analytic support for flow, level, pressure, temperature and valve applications.

お問合せ

仕様

MFC5150 HART® Communicator

The MFC5150 HART® Communicator is the latest addition to Meriam’s product line of hand-held calibrators and field communicators. Available in ATEX (intrinsically safe) and Non-ATEX models, the MFC5150 directly reads Device Descriptions without any translations or subscriptions, enabling communication to take place with any registered or unregistered HART® device. This ensures your HART® transmitter will connect, regardless of brand or model.


● The MFC5150 is built on the SDC-625 infrastructure and runs Windows CE.

● With a 1 GHz processor and an 4 GB Micro SD card, this HART® communicator is ideal for all of your data storage needs.

● The 4.3 inch touchscreen provides excellent anti-glare viewing, allowing for comfortable mobile use in darkness or in bright sunlight.

● All functions are easily navigated via the full QWERTY keyboard and intuitive icons similar to that of a smart phone.

● The handheld HART device also features hyperlink menu paths, teachable device specific shortcuts, instant on, multiple languages, help context, video’s and TAB access to panes just like on a computer.


Each unit includes: Docking Station with Universal Power Adapters, HART® Lead Kit, Rechargeable Battery Pack, USB Cable and SD Card, Soft Carrying Case, Hand Strap, Quick Start Guide.

MFC5150 HART® COMMUNICATOR: Accessories

Carrying Accessories

● Z9P790: Soft Carrying Case

● Z9P791: Hand Strap


Communication Accessories

● ZA900529-00014: HART® Lead Kit - std banana plugs, mini-grabbers, 250 ohm resistor

● ZA36821: Std size 250 ohm shunt resistor - req'd for HART® low resistance loops

● Z9P780: SD Card - Micro (minimum 4 GB)

● Z9P802-1: USB Cable - Communication from docking station to PC


Power Accessories

● Z9A879: Docking Station and Power Adapters - Universal Plug Kit (100 vac to 240 vac, 50-60hz)

● Z9A820-3: Battery Pack - Rechargeable 9600 mAh Li-Ion

MFT4000 CE IS Multi Function Modular Calibrator / HART® Communicator

The MFT 4000 Digital Calibrator is a base unit for pressure calibration work with selected NIST traceable sensor modules & integral voltage/current meter. The MFT 4010 Digital Calibrator with HART® is a base unit for modules and full device specific HART® communications. Quick Cal displays HART® PV and AO along with MFT’s NIST traceable measurements. User can identify needed trim(s) and access the trim function(s) from same display. Smart Trim allows selection of analog or digital trims without navigating through menu trees. Documenting included. Documenting memory stores up to 200 HART® configuration files and over 100 calibration results (as-found & as-left data [up to 21 points each], time/date info, tag). Communicate with PC via DB-9 connector.


Available modules include differential, gauge, vacuum and absolute pressure as well as temperature calibration, and voltage/current calibration. A voltage and current meter is integral to the base unit. All HART® field devices can be configured, polled, and trimmed using HART® communications. Device Specific commands for supported devices are included with the MFT.


Each unit includes: CE Mark, Test Lead Kit, HART Leads (Model 4010), Batteries, Universal Power Adapter, RS-232 Serial Cable and Users Manual.

Pressure Modules for MFT 4000, 4005, 4010

Pressure Sensor Modules from Meriam Process Technologies are available in a several types and ranges to provide the ultimate in flexibility and convenience for portable calibration standards. Calibration coefficients for all modules are stored in non-volatile sensor module memory. This means any pressure module can be used in any Meriam MFT without manual programming of coefficients. Engineering units, including PSI, centimeters or inches of H2O (at 4°C, 20°C, or 60°F), kg/cm2, kPa, mBars, Bars, millimeters, inches of Hg (at 0°C ref. temp) and oz/in2 are all selectable from the MFT keypad.

RIO4000 RTD Measure and Simulate Module for MFT4000

The RIO4000 is the RTD measure and simulate module for the Meriam MFT 4000 Series Multi-Function Tester. The module accurately measures or simulates the resistance of 22 different RTD sensor types with nominal resistance to 4000 ohms. 2-, 3-, and 4-wire RTD Measurement for various RTD types; platinum, copper, nickel or iron. The module can simulate temperature to all conventional or smart temperature transmitters and signal conditioners.

TIO0110 Thermocouple Measurement and Simulation Module for MFT 4000

The TIO0110 is a thermocouple (T/C) measurement and simulation module for use with the Meriam MFT 4000 Series Multi-Function Tester. The module will accurately measure or source ±110 milli-Volts (mV) for any of twelve (12) different T/C types according to NIST 175, ITS-90 (default) or ITS-68 standards. In the measure mode, the TIO0110 module converts mV dc to a temperature value in the user-selected temperature unit (°F, °C, °R or °K) and per the selected standard. Milli-volts can also be displayed for direct reading or trouble shooting needs. In the simulate mode, the TIO0110 module simulates an accurate mV signal to a receiving device. Users can enter the precise simulation temperature value, change the value with convenient controls on the MFT, or set-up and select from three Auto-Step or three Auto Ramp test procedures per T/C type. Test points are determined by the user and can be stepped through automatically or manually as desired.

T/C calibration coefficients are factory loaded into module memory for instant access by the base MFT. Field recalibration of the module is possible using the MFT’s “Rcal” feature (appropriate calibration standards are required).

VMA0055 Module for MFT4000, 4005, 4010

The VMA0055 is a DC voltage and current measurement and simulation module for use with the Meriam MFT 4000 Series Multi-Function Tester. The module features the functionality of a DVM and loop calibrator for convenient field versatility. When used with other MFT functions, the VMA / MFT combination provides valuable functionality not available in other devices. Measurement ranges include ±500 mV, ±55 V, and ±100 mA. Sourcing capabilities include ±1000 mV, 0 – 24 V and 0 – 22 mA. The VMA module will also simulate transmitter outputs when connected to a loop or it can be used to temporarily supply 24V DC loop power to unpowered devices during commissioning or calibration activities. 12 VMA0055 Advantages VMA0055 goes far beyond the ±50 volts / mA measurement capability of the MFT base unit and has its own isolated power supply so common ground problems are not an issue.

03-3730-5991 お問合せ

 カタログのダウンロードを希望される方はこちらをご入力ください。
 [必須]  (例)日本
 [必須]  (例)太郎
 メールアドレス[必須]   (例)[email protected]
 会社名[必須]
 郵便番号[必須]  (例)123-0001
 都道府県[必須]
 住所[必須]
 電話番号[必須]  (例)03-123-0000
 コメント
reCAPTCHA

購入ご検討段階から納入後のトラブル対応まで、経験豊富なスタッフが確かな技術力でお客様のご要望にお答え致します。まずは是非一度お気軽にご相談ください。

サポート

製品ピックアップ

すべて

prev next

展示会・イベント

詳細へ

国内で開催される様々な展示会・イベントで製品をご覧頂けます。


JDEC2018

  • 製品カタログ ダウンロード
  • 製品カタログ ダウンロード
  • 製品カタログ ダウンロード
お問い合わせ・資料請求

Copyright© JAPAN MACHINERY Co., Ltd. All rights reserved.