ポンプから医療機器まで幅広い商材を取り扱う機械専門商社 ジャパンマシナリー株式会社

LANGUAGE:
日本語
English
お問い合わせ・資料請求
ホーム > 製品情報 > DYNAguard S

DYNAguard S DYNAInstruments

特徴

The flow switch DYNAguard S is used to monitor the flow of solids in flexible hoses. It indicates through a relay output when a threshold is exceeded. The version with analogue output (4…20 mA) can additionally indicate a flow trend. When granulates, powders, blasting material, abrasives, dust or other solids are (pneumatically) transported, blockages, an empty hopper, rat holing or a product-bridge at the bottom of a storage tank can immediately and securely be recognized.
The measurement principle is based on the detection of moving electrical charges which naturally adhere to the solids surface and are produced e.g. through friction on the hose-wall. Only moving particles generate a signal. The hose is simply passed through the instrument (version T) and is tightened with the hose fittings. In applications with conductive hoses, or in cases where the hose must be cut for installation, the version E is used. Here the hose is plugged into hose fittings from two sides. Give us a call. We can provide valuable advice on solid material flow detection / flow monitoring.

お問合せ

仕様

Flow monitoring of bulk solids in flexible hoses


  • Integral measurement and trend output
  • Easy process integration
  • For conductive and non-conductive hoses
  • In pneumatic conveying and free fall
  • Technical Data


    Material Housing Edelstahl 1.4305 (ASIS 303)
    Isolation (standard) PA (Standard)
    Sealing (standard) NBR (Standard)
    FPM (Ex-Ausführung)
    Ambient cond. Temperature -20 °C ... +70 °C (-4 °F ... +158 °F)
    Degree of protection IP 67 (EN 60529)
    EMC Nach EN 61326-1
    Process cond. Sensitivity 0,1 mg/m³
    Temperature Standard: max. +70 °C (+158 °F)
    Pressure Max. 10 bar (140 lbs)
    Output DYNAguard S01 Relais: max. 48 V AC/DC, 1A
    DYNAguard S02 Transistor: galvanisch getrennt
    Max. 31 V DC, 15 mA
    DYNAguard S20 4 - 20 mA, galvanisch getrennt
    Load < 500 Ω
    Supply Voltage DYNAguard S01/02 17 - 31 V DC, max. 60 mA
    DYNAguard S20 17 - 31 V DC, max. 90 mA
    Adjustment Sensitivity 1 - 180.000
    Damping 0 - 10 s (S01/02), 0 - 180 s (S20)
    Switchpoint 1 - 10 (DYNAguard S01/02)
    Zero set 4 mA (DYNAguard S20)
    Switch output High/low switchable


    DYNAguard S Datasheet - flow switch for bulk solids
    Brochure DYNAguard Series
    Product overview DYNA Instruments

    03-3730-5991 お問合せ

     カタログのダウンロードを希望される方はこちらをご入力ください。
     [必須]  (例)日本
     [必須]  (例)太郎
     メールアドレス[必須]   (例)[email protected]
     会社名[必須]
     郵便番号[必須]  (例)123-0001
     都道府県[必須]
     住所[必須]
     電話番号[必須]  (例)03-123-0000
     コメント

    購入ご検討段階から納入後のトラブル対応まで、経験豊富なスタッフが確かな技術力でお客様のご要望にお答え致します。まずは是非一度お気軽にご相談ください。

    サポート

    製品ピックアップ

    すべて

    prev next

    展示会・イベント

    詳細へ

    国内で開催される様々な展示会・イベントで製品をご覧頂けます。


    JFES

    • 製品カタログ ダウンロード
    • 製品カタログ ダウンロード
    • 製品カタログ ダウンロード
    お問い合わせ・資料請求

    Copyright© JAPAN MACHINERY Co., Ltd. All rights reserved.