ポンプから医療機器まで幅広い商材を取り扱う機械専門商社 ジャパンマシナリー株式会社

LANGUAGE:
日本語
English
お問い合わせ・資料請求
ホーム > 製品情報 > DYNAguard P

DYNAguard P DYNAInstruments

特徴

The indicator DYNAguard P is used for monitoring the mass flow in solid material handling applications such as pneumatic transport lines, free fall pipes, chutes or hopper in a wide range of mass flow from g/h to t/h.
The meter detects moving electrical charges that are produced, for example, through friction with other objects such as the pipe wall and then naturally adhere to the solids surface solids, solid lining will not be detected. The detection area goes some centimeters around the sensor plate so that nearby located moving components as e.g. flaps do not have any influence. Due to the measuring principle also moving massive compact solids as plates or rods can be monitored. The device is not applicable for solids which build up an electrical conducting layer on the sensor surface through friction or deposition.

お問合せ

仕様

Flow Indicator for Solids


  • Electrostatic / triboelectric
  • Non-contact, non-intrusive
  • Compact design
  • Detection of only moving material - not influenced by deposits
  • Small detection area
  • Relay and 4...20mA version
  • Flow displayed by LED-bar (relay version)
  • Easy outside mounting at pipes of non-conductive material
  • Reliable, longterm stable, maintenance free
  • Technical Data


    Material Housing Stainl. steel1.4305 (ASIS 303)
    Sensor plate (standard) Stainl. steel1.4571 (AISI 316 Ti)
    Isolation (standard) Polyamid (PA)
    Sealing (standard) NBR
    Ambient cond. Temperature -20 °C ... +70 °C (-4 °F ... +158 °F)
    Degree of protection IP 67 (EN 60529)
    EMC According to EN 61326-1
    Process cond. Temperature Max. +90 °C (+194 °F)
    Pressure Max. 6 bar (84 lbs)
    Output DYNAguard P01 Relais: max. 48 V AC/DC, 1A
    High/low switchable
    DYNAguard P02 Transistor: galvanically isolated
    Max. 31 V DC, 15 mA
    High/low switchable
    DYNAguard P20 4 - 20 mA, galvanically isolated
    Load < 500 Ω
    Supply Voltage DYNAguard P01/02 17 - 31 V DC, max. 60 mA
    DYNAguard P20 17 - 31 V DC, max. 90 mA
    Adjustment Sensitivity 1 - 180.000
    Damping 0 - 10 s (P01/02), 0 - 180 s (P20)
    Switchpoint 1 - 10 (DYNAguard P01/02)
    Zero set 4 mA (DYNAguard P20)


    DYNAguard P Datasheet - flow switch for bulk solids
    Brochure DYNAguard Series
    Product overview DYNA Instruments

    03-3730-5991 お問合せ

    購入ご検討段階から納入後のトラブル対応まで、経験豊富なスタッフが確かな技術力でお客様のご要望にお答え致します。まずは是非一度お気軽にご相談ください。

    サポート

    製品ピックアップ

    すべて

    prev next

    展示会・イベント

    詳細へ

    国内で開催される様々な展示会・イベントで製品をご覧頂けます。


    JFES

    • 製品カタログ ダウンロード
    • 製品カタログ ダウンロード
    • 製品カタログ ダウンロード
    お問い合わせ・資料請求

    Copyright© JAPAN MACHINERY Co., Ltd. All rights reserved.