ポンプから医療機器まで幅広い商材を取り扱う機械専門商社 ジャパンマシナリー株式会社

LANGUAGE:
日本語
English
お問い合わせ・資料請求
ホーム > 製品情報 > DYNAguard M

DYNAguard M DYNAInstruments

特徴

The microwave-indicator DYNAguard M is used for monitoring the mass flow in open and closed transport processes also with big distances between sensor and conveyed material. Independent of particles moving direction solid materials with velocity of at least 0.1 m/s will be detected by passing the microwave field. Conveying or feeding problems of powders, pellets or granules are detected early and thus should be avoided. This helps to prevent plant failures like clogging, material loss, idle or other serious difficulties. DYNAguard M has to be installed with an angle of 45° up to 90° of flow direction. Moving mechanical parts e.g. rotary valves, propellers or similar should not be in the detection field, because this might be detected as flow of material. If these 'disturbance source' can not be displaced, they have to be shielded or a DYNAguard of electrostatic type as DYNAguard P should be used.

お問合せ

仕様

Flow Indicator for Solids 'flow / no flow'


  • Microwave technique
  • Compact design with relay output
  • Detection of only moving material - not influenced by deposits
  • Easy outside mounting at pipes of non-conductive material
  • Reliable, longterm stable, maintenance free
  • Technical Data


    Material Housing Stainl. steel 1.4305 (ASIS 303)
    Window (standard) PTFE
    Sealing (standard) NBR
    Ambient cond. Temperature -20 °C ... +70 °C (-4 °F ... +158 °F)
    Degree of protection IP 65 (EN 60529)
    EMC Nach EN 61326-1
    Process cond. Temperature -20 ... +90 °C (-4 °F ... +194 °F)
    Pressure Max. 2 bar (29 lbs)
    Relay Switching voltage Max. 110 VDC / 125 VAC
    Min. 10 mVDC
    Switching current Max. 1 A, 30 VDC / 0,5 A, 125 VAC
    Min. 10 μA
    Switching power 30 W / 62,5 VA
    Microwave Transmitting power 5 mW bei +25 °C
    Frequency 24 GH
    Supply Voltage 18 - 36 VDC, 16 - 28 VAC
    Current consumpting Approx. 80 mA bei 24 VDC
    Adjustment Sensitivity Wide range
    Damping 0 - 22 s
    Relay hysteresis 0 - 30 %


    DYNAguard M Datasheet - flow switch for bulk solids
    Brochure DYNAguard Series
    Product overview DYNA Instruments

    03-3730-5991 お問合せ

    購入ご検討段階から納入後のトラブル対応まで、経験豊富なスタッフが確かな技術力でお客様のご要望にお答え致します。まずは是非一度お気軽にご相談ください。

    サポート

    製品ピックアップ

    すべて

    prev next

    展示会・イベント

    詳細へ

    国内で開催される様々な展示会・イベントで製品をご覧頂けます。


    JFES

    • 製品カタログ ダウンロード
    • 製品カタログ ダウンロード
    • 製品カタログ ダウンロード
    お問い合わせ・資料請求

    Copyright© JAPAN MACHINERY Co., Ltd. All rights reserved.