ポンプから医療機器まで幅広い商材を取り扱う機械専門商社 ジャパンマシナリー株式会社

LANGUAGE:
日本語
English
お問い合わせ・資料請求
ホーム > 製品情報 > DYNAguard K

DYNAguard K DYNAInstruments

特徴

The indicator of DYNAguard K helps to monitor the mass flow in solid material handling applications such as pneumatic transport lines, feeders or gravity chutes in a wide range of mass flow from g/h to t/h. Conveying or feeding problems of powders, pellets or granules are detected early and thus should be avoided. This helps to prevent plant failures like clogging, material loss, idle or other serious difficulties. The meter detects moving electrical charges that are produced, for example, through friction with other objects such as the pipe wall and then naturally adhere to the solids surface solids, solid lining will not be detected. The device is not applicable for solids which build up an electrical conducting layer on the sensor through friction or deposition.

お問合せ

仕様

Flow Indicator for Solids


  • Electrostatic / triboelectric
  • Non-contact, non-intrusive
  • Compact design
  • Detection of only moving material - not influenced by deposits
  • Detection area: flange interior
  • Relay and 4...20mA version
  • Flow displayed by LED-bar (relay version)
  • Easy mounting between DIN- / ANSI - flanges up to 40 bar (570 lbs)
  • Reliable, longterm stable, maintenance free
  • Technical Data


    Material Housing Stainl. steel1.4305 (ASIS 303)
    Process coupling Stainl. steel1.4571 (AISI 316 Ti)
    Isolation (standard) Polyamide (PA), 2 mm
    Ambient cond. Temperature -20 °C ... +70 °C (-4 °F ... +158 °F)
    Degree of protection IP 67 (EN 60529)
    EMC according to EN 61326-1
    Process Temperature Max. +90 °C (+194 °F)
    Pressure Max. 40 bar (570 lbs)
    Output DYNAguard K01 Relay: max. 48 V AC/DC, 1A
    High/low switchable
    DYNAguard K02 Transistor: galvanically isolated
    Max. 31 V DC, 15 mA
    High/low switchable
    DYNAguard K20 4 - 20 mA, galvanically isolated
    Load < 500 Ω
    Supply voltage DYNAguard K01/K02 17 - 31 V DC, max. 60 mA
    DYNAguard K20 17 - 31 V DC, max. 90 mA
    Adjustment Sensitivity 1 - 180.000
    Damping 0 - 10 s (K01/02), 0 - 180 s (K20)
    Switchpoint 1 - 10 (DYNAguard K01/02)
    Zero set 4 mA (DYNAguard K20)


    DYNAguard K Datasheet - flow switch for bulk solids
    Brochure DYNAguard Series
    Product overview DYNA Instruments

    03-3730-5991 お問合せ

     カタログのダウンロードを希望される方はこちらをご入力ください。
     [必須]  (例)日本
     [必須]  (例)太郎
     メールアドレス[必須]   (例)[email protected]
     会社名[必須]
     郵便番号[必須]  (例)123-0001
     都道府県[必須]
     住所[必須]
     電話番号[必須]  (例)03-123-0000
     コメント

    購入ご検討段階から納入後のトラブル対応まで、経験豊富なスタッフが確かな技術力でお客様のご要望にお答え致します。まずは是非一度お気軽にご相談ください。

    サポート

    製品ピックアップ

    すべて

    prev next

    展示会・イベント

    詳細へ

    国内で開催される様々な展示会・イベントで製品をご覧頂けます。


    JFES

    • 製品カタログ ダウンロード
    • 製品カタログ ダウンロード
    • 製品カタログ ダウンロード
    お問い合わせ・資料請求

    Copyright© JAPAN MACHINERY Co., Ltd. All rights reserved.